Full closed loop control
Motor with standard 1000 line encoder
It save energy and achieve nearly 100% output torque .
Micro step setting range is 2-256
High speed response , High speed
Optical isolation fault alarm output interface ALM
Current loop bandwidth: (-3dB) 2KHz (typical value)
Speed loop bandwidth: 500Hz (typical value)
Position loop bandwidth: 200Hz (typical value)
RS232 serial communication available to download or change the parameters
Optical isolation fault alarm output interface ALM
Over current, I2T, over voltage, under voltage,temperature, speeding, over-differential protection
Alarm clear input ENA
Introduction
2HSS86H
2 phase hybrid stepper servo drive system integrated servo control technology into the digital step driver. It adopts typical tricyclic control method which include current loop,speed loop and position loop.This product has the advantage of both step and servo system, and it’s a highly cost-effective motion control products.
Electrical Specifications
Parameters |
Min |
Typical |
Max |
Unit |
Supply voltage |
30V |
60V |
75V |
VDC |
Output Current (Peak) |
- |
- |
8.0 |
Amps |
Logic Input Current |
- |
10 |
- |
mA |
Pulse input frequency |
- |
- |
200 |
KHz |
Low Level Time |
2.5 |
- |
- |
µsec |
Environment
Cooling |
Natural Cooling or Forced Convection |
|
Environment |
Storage Space |
Avoid dust, oil frost and corrosive gases |
Ambient Temperature |
-20°C - +80°C |
|
Humidity |
<80%RH |
|
Vibration |
5.9m/s² Max |
|
Storage Temp. |
-20°C - +80°C |
|
Weight |
Approx. 580 gram |